Consumers in the selection of second-hand car,
always worry about whether there is a big accident. In the selection of
second-hand car, in addition to grasp the merits of the key components of the
engine, brakes, turn, transmission, electrical equipment, grasp the vehicle
once the accident is also very important. While check the frame is a good way
to determine the whether have cracking accident.
When choose the second-hand car, must to test drive
before you buy, if have the steering uneven and unstable, wheel have ring in
the process of straight, tire has abrasion, braking deviation and so on problem
happens when you test drive, it may be the frame has been hit deformed caused.
When site inspection of the vehicle, by the
following method:
1. Find straight line. Check the right and left side front and rear wheels
whether a straight line, if not, that means the overall frame bent.
2. Measurement gap. Measuring the gap of each wheel rear side and wheel cover,
should be roughly the same, otherwise explain the frame or whole body with a
curved signs.
3. Find traces. look the two rails of the whole cabin, usually not easy to see
the bottom of the battery, while the left side is easy to observe.Check them
whether have the sign of welding or cracking. If it is rear-end or side-impact
accident, the frame will be squeezed then bent or cracked, need welding repair.
4. Find cracking. Check car's fender portion, which is the key part to
determine the car whole body whether have accident, if there are traces of
welding or cracking, it shows have appeared side-impact accident; If can drive
to the trench, you can clearly checked.
If you think these are trouble, you can use car diagnostic tool to detect whether have collision, that is simple and convenient. universal
car scanner can works on different brands of vehicles through OBD. You can
think it as a powerful PC based car obd2
scanner which can enter in many kinds
of cars system and diagnose the problem of car even if make some coding job.
More related topics
没有评论:
发表评论