VAG 409 is a Windows based diagnostic software for Volkswagen, Audi, Seat and Skoda vehicles that emulates the functions of expensive professional scan tools.
It is fully compatible with all models of the above makes of car or van produced between 1996 and 2004 (see below for more information on earlier models).
Compatible with the above makes of car with CAN connection.
Has a data base of more than 7500 fault codes and measuring block texts.
Can use the new 7 digit PIN/SKC codes to match new keys in all immobilizer-equipped for VW, Aodi, Seat and Skoda models.
Description:
Primary Function:USB Vag-Com interface cable
OBDII Plug: J1962 16-Pin Male (to Car)
USB Port enabled
Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.
Supports terminal (K) bus communication
Terminal (L) ignition for waking up car computing system (ECU) engine control unit
Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.
Refer to your car user manual or check with your car dealer or local mechanic whether your car is compatible with this product.
Supported Vehicles:
1.For Audi Models:
1)Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
2)Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
2.For SEAT Models:
1)Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
2)Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
3.For Skoda Models:
1)Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
2)Not Compatible: Octavia (1Z)
4.For VW Models:
1)Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
2)Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton
Specification of KKL Vag Com 409.1:
Manufacturer Ref: C44D47A6AF72
Catalog Ref: Car accessories, cable fault code, VAG-COM, OBD2 cable
Other Features:
Also supports ISO9141 protocol
No DC or alternate power supply needed, just connect to your car and computer
Work for Volkswagen and for Audi models sold worldwide from 1994 to current year
The CVFG-A11 cable cannot work if your car uses a protocol bus system like VPW, PWM or CAN -bus
The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.
It Refers:
http://www.aliexpress.com/store/2142157
USB Vag-Com interface cable. OBDII Plug: J1962 16-Pin Male (to Car). Operating Windows 98SE / ME / 2000 / NT and XP. Supports terminal (K) bus communication, Terminal (L) ignition for waking up car computing system (ECU) engine control unit, Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.
回复删除Features:
1. Support ISO15765-4 (CAN)/ ISO14230-4 (KWP2000)/ISO9141-2.But not for Ford and IOS . Santana 2000/3000.
2. Audi 100/200/80/90/A4/A6/A8. Era Superman, Polo (Except 02/03 paragraph POLO).
3. Bora, Jetta, Beetle, Golf, Passat, SEAT, Small red flag. All other public / Audi models; 5051 does not support CANBUS models, such as the Audi A6L, Speed Teng, Caddy, Touran, Octavia, these models please buy 5053.
Source : http://techprotools.blogspot.com/