显示标签为“TCS CDP”的博文。显示所有博文
显示标签为“TCS CDP”的博文。显示所有博文

2015年7月5日星期日

The Problem of KEYGEN Icon When Installation Delphi DS150E



First, very thanks for everybody to read this article of delphi ds150e installation, this software is suitable for installation in Wind7 32-bit systems.
The last time I had two friends from Turkey have the problem of KEYGEN icon can not open and load identification when installation of DS150E, i think many friends also have this problem. Because some areas language of ds150e software can not recognized, pre-installation is normal, but when encountered KEYGEN need to read will does not recognize, this time we can change the language into English through the computer control panel area language, then KEYGEN icon can be normal identification and read.

The DVD of DS150E software contains two installation test, one is truck, and the other is car, the ways of installation are the same. You can install according to your needs test version.

Installation first step: at the first, we can choose according to our needs test version,open the required version file find MAIN.exe, then click it to set up.

Wait for the installation, we will choose the back arrow during the installation, until meet Start, click it , choose YES, it will appear a file we need to save, we can save it on our desktop and don’t need change the file name.

The next step we can open the file: 2014.2 KEYGEN of DS150E DVD, then choose KEYGEN icon to load.
 
Loaded will pop up a small window, choose open and activate.

Finished this step,we go back to the beginning of installation choose Start. This time we need to choose No. It will pop up a window, click the file that we saved on the desktop, then we can wait for the system installation, this installation is complete.

When installed must pay attention to small details, in order to choose and install. Many friends unsuccessful installation may ignore the order of the installation process, every step needs pay attention to, If you choose less step, or the wrong step will waste your time, and need reinstall.The problem of install have been reflected, if you have any problems during the installation process, welcome back to us.

More related topics




2015年6月29日星期一

Notice of DS150E & TCS CDP



Notice of installing and using software:
1. Shut down antivirus software before installing software otherwise some important programs will be killed by accident.
2. Close the internet connection before installing software.
3. Installing the software following the video in DVD. Sometimes you can not install software successfully at the first time, please uninstall software and delete related file in disk C:\\ and install again.

Notice of using DS150 (TCS CDP) to test car:
1. Please close the internet before connecting VCI to laptop, otherwise the laptop will find driver of VCI from internet ( need long time or fail).

2. The laptop will say VCI NO FOUND when you use Delphi DS150E (TCS CDP) on a laptop which be newly installed with delphi software. Please do not worry, you just need to make setup manually.

Click Setup when NO VCI found appears.


Click TEST for establishing connection between VCI and PC, meanwhile you can read out some informaiton of DS150E VCI for example series number, firmware version and so on.


Back to main page after self-test and click eOBD and then your VCI can connect to the car.


Read out protocol,DTC and see all system in old BMW 325I:


If you bought DS150E(TCS CDP) with bluetooth function, please find the password in device name after your laptop find DS150E by bluetooth way. Before connect VCI by bluetooth, you need to notice below issues:

(1) Your laptop has internal BT device and driver already installed.
(2) If you have no internal BT inside, you can buy a external BT device and install drivers properly.

All DS150E ( TCS CDP) device will be tested 3 times at least before shipping. So, please contact us if you have any question, opening dispute case is not welcomed and helpless.

More related topics