If your computer V86 software
and your VCM2 because of software version doesn't match so can’t test. Then follow the steps below you will be able to test.
1. First unplug the black
jacket of your VCM 2, you will find a red button.
2. After installed the
software, open the IDS icon of your computer desktop.
3. Hold the red
button don’t open your hand, untill your VCM2 USB connect with the computer,
when the VCM2 ring out then let go of your hand, pop-up this interface choose √.
4. Then into refresh
version interface.
5. After
refresh version choose √.
6. Then connect the car and
VCM 2. (if display not connected, check your computer equipment management
network card if there is VCM, if there is no, unplug the USB connector into
your computer again)
7.Choose the connected,
click √ to
next test.
8. Choose Expcdition click √ to the next
step.
9. See the screen display
Vehicle Specification, click YES.
10.Display VIN choose √ to the next
step.
12.Then click the upper
left red toolbox of the program, choose Self Test, choose √ access.
13.Then choose ALL
CMDTCs,click √ to
the next step.
14.Finally can see the
complete data of this time test.
More related
topics
没有评论:
发表评论